Posi-flate*的蝶阀设计采用气压扩大阀座对阀瓣,甚至提供气密密封的压力分布,每一次。因为座位让只有偶然接触阀瓣阀开启和关闭期间,有zui小的圆盘撞击。这与传统蝶阀阀瓣撞击导致剃须的阀座,减少总体性能和阀门life.的生活。
大大减少扭矩需要打开和关闭Posi-flate蝶阀,因此可以使用更小的执行机构阀门降低总体成本。
在实际的对比测试和记录现场应用,Posi-flate蝶阀outperformed all other valves. 比其他所有阀门。In fact, a Posi-flate事实上,Posi-flatevalve life of one to three million cycles,阀门的使用寿命的三百万周期,even in extremely abrasive applications, is not即使在极其磨料应用,不是uncommon. 少见。For dry solids, gases and slurry干燥的固体,气体和泥浆applications, the Posi-flate inflatable seated应用程序,Posi-flate充气就座butterfly valve is unsurpassed.蝶阀是的。
The Posi-flate 蝶阀是专为zuisevere conditions. 严重的条件。The seat is designed座椅设计for heavy duty applications and higher对于重型应用程序和更高operating pressures. 操作压力。Standard valve sizes标准阀尺寸range from 2" (50mm) to 24" (600mm) and fit范围从2”(50毫米)24”(600毫米)和健康both ANSI and metric flanges. ANSI和公制法兰。A full line of完整的线actuators, limit switches and controls are致动器、限位开关和控制available to suit individual applications.根据单独的应用程序可用。
Posi-flate阀性能特性
Heavy duty重型
Inflatable seat compensates for disc and seat wear充气座椅补偿阀瓣和阀座磨损
Longer valve life延长阀门的使用寿命
Minimal seat wearzui小的阀座磨损
No disc impingement没有圆盘撞击
Ultra-low torque requirements极低的转矩要求
Lower actuator costs致动器成本低
More seal contact area更多的密封接触面积
Proven excellent for abrasive and dry solids证明以磨料和干燥的固体
Disc designed to prevent material buildup盘旨在防止材料积累
Double shaft seals两轴密封
Multiple bearings多个轴承
Fail-safe monitoring故障安全监控
Temperature limits:温度范围:-40° to 350° F (-40° to 175° C), varies with application and materials of construction.-40°- 350°F(-40°- 175°C),随应用程序和施工材料。
Air supply:空气供给:135 psig (9.3 bar) maximum to seat,135 psig(9.3条)zui大的座位,varies with materials of construction and application.随材料的建设和应用。
Working pressure:工作压力:FFull vacuum to 150 psig (10.3 bar) depending on application and materials of construction.妳真空150 psig(10.3条)取决于应用程序和施工材料。
Operating torque:操作扭矩:Varies with application.随应用程序。
可用材料的建筑
Housing:住房:Cast iron, stainless steel, aluminum, nickel-plated cast iron, epoxy coated cast iron, nylon coated cast iron铸铁、不锈钢、铝、镀镍铸铁、环氧涂层铸铁、尼龙涂层铸铁
Resilient Seat:弹性阀座:EPDM, Buna-N, polyurethane, fluoroelastomer, FDA silicone, FDA white Buna-N, FDA white EPDM, FDA white fluoroelastomer三元乙丙橡胶、丁腈橡胶、聚氨酯、氟橡胶、食品及药物管理局硅胶,FDA白色丁腈橡胶,FDA白三元乙丙橡胶,FDA白色氟橡胶
585 Disc:585盘:Cast iron, 316 stainless steel铸铁,316不锈钢
585 Disc/Shaft:585盘/轴:316 stainless steel (satin or polished), molded nylon over stainless steel shaft, superalloy, cast iron. 316不锈钢(缎或抛光),成型尼龙/不锈钢轴、超耐热不锈钢,铸铁。PTFE and other custom coatings available聚四氟乙烯和其他定制的涂料
Bearings:轴承:Polymer, bronze聚合物、青铜
585 Disc Screws:585阀瓣螺丝:Carbon steel, stainless steel碳钢、不锈钢
585 Shaft:585轴:Zinc-plated carbon steel, 316 stainless steel镀锌碳钢、316不锈钢
Shaft Seal:轴封:Buna-N丁腈橡胶, silicone, fluoroelastomer, EPDM、有机硅、氟橡胶、三元乙丙橡胶
Housing Gasket:房价垫:Buna-N (Series 586), silicone, EPDM丁腈橡胶(586系列)、硅胶、三元乙丙橡胶
Retaining Ring:扣环:Carbon steel, stainless steel碳钢、不锈钢
Housing Bolts:房价螺栓:Carbon steel, stainless steel碳钢、不锈钢 |
